Water online PID control panel is used to maintain the water pressure in the industries where water pressure is to be maintain in the water channel so this panel is used to control and maintain the water pressure by adjusting the VFD. According to the feedback taken from water channel through pressure transmitter.

In Furnace negative draft is maintained to prevent explosions, heat or fire from the leakages in tubes of boiler due to positive pressure in the flue gas chamber or in furnace chamber so the pressure is kept slightly kept negative to make the flue gases out from the chimney. So this controlling panel is used to maintain the negative pressure in the furnace area with respect to by controlling ID Fan, FD Fan and Screw Feeder in the boiler furnace area. So it will successfully make out the flue gases and ash from the furnace.

Stenter Automation is used in Stenter machine in Dyeing industry. This PLC based control system controls the main motor, Mangle, Overfeed, Underfeed, Seldvage, Take-up, Plaiter etc. all the VFD are controlled by this panel and Stenter machine is fully atomized. Chamber temperature is maintained with high performance PID Controller. Narrow wide setting is done of all chamber with chain safety, blower RPM setting is also done with it, and Exhaust RPM is also controlled with it. Fault detection is also present.

In Furnace negative draft is maintained to prevent explosions, heat or fire from the leakages in tubes of boiler due to positive pressure in the flue gas chamber or in furnace chamber so the pressure is kept slightly kept negative to make the flue gases out from the chimney. So this controlling panel is used to maintain the negative pressure in the furnace area with respect to by controlling ID Fan, FD Fan and Screw Feeder in the boiler furnace area. So it will successfully make out the flue gases and ash from the furnace.

Production Monitoring System used to keep production report and shows the current production of any machinery with history record, machine stoppage report, machine run time report, etc. and all this report can be viewed remotely from any location over static IP. This panel can record production of 16 machine.

PID panel is designed for Boiler Automation, Thermopack boiler can be atomized using this system. This system controls the ID Fan, FD Fan and screw feeder according temperature in Thermopack boiler. Temperature sensor's input is given to PID input and desired temperature and pressure is set in PID setting then that desired temperature is maintained. This PID will control the boiler controller to maintain the speed of ID Fan, FD Fan and Screw Feeder Speed.

PID panel is designed for Boiler Automation, steam boiler can be atomized using this system. This system controls the ID Fan, FD Fan and screw feeder according to pressure in steam boiler Pressure sensor's input is given to PID input and desired temperature and pressure is set in PID setting then that desired Pressure is maintained. This PID will control the boiler controller to maintain the speed of ID Fan, FD Fan and Screw Feeder Speed.

Jet Automation Panel is used to Control U-Jet Machine which is used to die the fabric. This panel is used to control that dyeing machine in fully automatic manner through PLC and HMI and user can view and control each and every parameter of the machine like temperature, pressure, water consumption, water in valve, drain or water out valve, pressure etc. and user can also view the previous batch parameter in detail. This panel is operator friendly because it is been designed in operator friendly Hindi language and graphics is very much simple and attractive so that it is easy to operate by the operator. There is also facility of controlling this system remotely from anywhere over the world with static IP or in the network. User can also run the machine according to recipe of different clothed which is to be added only once. Data record can be viewed of any time or batch and can be exported to Computer in Excel format for analysing the data.

Drum Automation Panel is used to Control Drum Machine which is used to die the fabric. This panel is used to control that dyeing machine in fully automatic manner through PLC and HMI and user can view and control each and every parameter of the machine like temperature, pressure, water consumption, water in valve, drain or water out valve, pressure etc. and user can also view the previous batch parameter in detail. This panel is operator friendly because it is been designed in operator friendly Hindi language and graphics is very much simple and attractive so that it is easy to operate by the operator. There is also facility of controlling this system remotely from anywhere over the world or in the network. User can also run the machine according to recipe of different clothed which is to be added only once. Data record can be viewed of any time or batch and can be exported to Computer in Excel format for analysing the data.